Hypoid Gears With Involute Teeth
David B.Dooner
Download
28
فروردین
مقالات انگلیسی
21
فروردین
An Innovative Way of Designing Gear Hobbing Processes
F. Klocke, C. Gorgels, R. Schalaster and A. Stuckenberg
(First presented at the VDI
International Conference on
Gears, October 2010, Te...
18
فروردین
The Design and Manufacture of Machined Plastic Gears
Design Parameters of Plastic Gears
by
John H. Chen and frank M. IUMbe
The Poly.mer Corporation
Reading, Pennsylvania 19603
Download
01
اسفند
Analytically evaluating the influence of crack on the mesh stiffness of a planetary gear set
a b s t r a c t
Article history:
Received 19 February 2013
Received in revised form 3 February 2014
Accepted 3 February 2014
Available ...
01
اسفند
Spur gear tooth root crack detection using time synchronous averaging under fluctuating speed
a b s t r a c t
Filtering techniques are used to improve the signal to noise ratio (SNR) for better feature
extraction. The time synchr...
01
اسفند
MITIGATION OF GEAR MESH-FREQUENCY VIBRATIONS UTILIZING A HYDROSTATIC BEARING
Submitted in partial fulfillment of the requirements
for the degree of Doctor of Philosophy
Thesis Advisor: Dr. Maurice L. Adams
Depart...
01
اسفند
A tribo-dynamic model of a spur gear pair
a b s t r a c t
In this study,atribo-dynamics model for spur gear pairs is proposed. The model couples a
mixed elasto hydro dynamic lub...
01
اسفند
STATIC AND DYNAMIC ANALYSIS OF HIGH CONTACT RATIO SPUR GEAR DRIVE
A thesis submitted in the partial fulfillment
of the requirements for the degree of
Master of Technology
In
Mechanical Engineering
Sub...
01
اسفند
Influence of tribological and geometrical parameters on lubrication conditions and noise of gear transmissions
a b s t r a c t
Article history:
Received 21 December 2012
Received in revised form 13 June 2013
Accepted 15 June 2013
Available online...
01
اسفند
Modal Analysis to Minimize Gearbox Induced Noise of General Electric Wind Turbines
ABSTRACT
With the current global emphasis on alternative green energy sources, wind
turbine technologies have seen significant growth i...